Aimpoint Models:

Heavy-duty variants of the CompC built for extreme conditions.

This sight has a special hard-anodized surface and the specification for water tightness is equivalent to a depth of 75 feet. The high quality requirements are designed to cope with frequent professional use on those types of guns that are typically used by the police and the military or for hunting under extreme conditions.

The CompM2 is compatible with all generations night vision devices but is otherwise identical in construction to the CompML2. At the lowest brightness setting (for night-time use with NVD) there is no need for an “off” position on the switch. No sight on the market can rival the light transmission through an Aimpoint sight in both the visible and IR ranges/spectra. This becomes especially obvious in dim conditions. The CompM2 has 4 NVD settings to give an extremely clear reticle in dark conditions.

The inner tube is suspended in a unique spherical joint – large view, greater (+/- 2.5 meters) adjustment range at 100 meters with repeatable, accurate click adjustments.

Guaranteed submersible to 25 m without tightening the adjustment caps. Tests have been successful down to 100 m.

CompM2 red dot sight can be mounted on almost any type of rifle and with the co-witnessing (applicable to many small calibre weapons) the iron sights are visible through the sight as a back-up. There is also a quick-release ring for Picatinny or Weaver bases, allowing the sight to be rapidly detached and remounted without zeroing. Pop up caps (shown) are included.

Aimpoint Comp M2 2x

Same as the M2 above but with a fixed 2 power lens system.

Heavy-duty variants of the CompC built for extreme conditions.

This sight has a special hard-anodized surface and the specification for water tightness is equivalent to a depth of 75 feet. The high quality requirements are designed to cope with frequent professional use on those types of guns that are typically used by the police and the military or for hunting under extreme conditions. For compatibility with all generation night vision devices, see Aimpoint CompM2.

The inner tube is suspended in a unique spherical joint – large view, greater (+/- 2.5 meters) adjustment range at 100 meters with repeatable, accurate click adjustments.

Guaranteed submersible to 25 m without tightening the adjustment caps. Tests have been successful down to 100 m.

CompML2 red dot sight can be mounted on almost any type of rifle and with the co-witnessing (applicable to many small calibre weapons) the iron sights are visible through the sight as a back-up. There is also a quick-release ring for Picatinny or Weaver bases, allowing the sight to be rapidly detached and remounted without zeroing. Pop up caps (shown) are included.

Aimpoint Comp ML2 2x

Same as the ML2 above but with a fixed 2 power lens system.

Aimpoint 7000L

Full-length sight intended primarily for sporting rifles with standard and magnum length actions. This sight can be used with virtually all 30 mm ring systems. For special applications, a 38 mm ring can be used to mount the sight by attaching directly to the objective "bell".

Aimpoint 7000L 2x

This sight is identical to the basic models, but is equipped with a fixed 2-power lens system that provides low magnification for increased range while maintaining unlimited eye relief and rapid target acquisition.

Aimpoint 7000 SC

The Aimpoint® 7000SC is a hybrid design incorporating features of both the 7000 and Comp families of Aimpoint® sights. The fusion of the short front tube, compact body and long rear tube allows unprecedented mounting flexibility. This sight is suitable for firearms with shorter actions and for semi-automatic firearms as well as magnum handguns. See 7000L for mounting information.

Aimpoint 7000SC SM

The Aimpoint® 7000SC SM is a hybrid design incorporating features of both the 7000 and Comp families of Aimpoint® sights. The fusion of the short front tube, compact body and long rear tube allows unprecedented mounting flexibility. This sight is suitable for firearms with shorter actions and for semi-automatic firearms as well as magnum handguns. See 7000L for mounting information.

Aimpoint Comp C

Mounted with the supplied special wide 30 mm ring that fits all Weaver bases. This sight is ideal when a short mounting base is required as the total length of the sight is only 4 ¾”. This makes the CompC particularly desirable whenever a lightweight, compact sight is required, such as for use on a ”scout” rifle, carbine, or competition pistol. CompC is also available in a Silver Metallic finish. The CompC (black only) is also available with a fixed 2 power lens system.

Aimpoint Comp C SM

The Aimpoint CompC SM is a hybrid sight incorporating the new features of the CompC and the extremely fast target acquisition of a 7MOA dot from the well-known XD technology.

Mounted with the supplied special wide 30 mm ring that fits all Weaver bases. This sight is ideal when a short mounting base is required as the total length of the sight is only 4 ¾”. This makes the CompC particularly desirable whenever a lightweight, compact sight is required, such as for use on a “scout” rifle, carbine, or competition pistol.

Aimpoint Comp C 2X

Mounted with the supplied special wide 30 mm ring that fits all Weaver bases. This 2x sight is ideal when a short mounting base is required as the total length of the sight is only 4 ¾”. This makes the CompC 2x particularly desirable whenever a lightweight, compact sight is required, such as for use on a ”scout” rifle, carbine, or competition pistol.

Package Deal #1

Aimpoint # 10038 ML2 with Arms #22M68 Lever Ring Mount.

Package Deal #2

A2 Handle Mount Set Up with ML2. Includes all of the following: # 10338 Aimpoint ML2, #0568059 QRP (Picatinny), and #10174 M16 Forward Mount.

Package Deal #3

Aimpoint #10336 M2 with Arms #22M68 Lever Ring Mount.

Package Deal #4

A2 Handle Mount Set Up with M2. Includes all of the following: # 10336 Aimpoint M2, #0568059 QRP (Picatinny), and #10174 M16 Forward Mount.

Package Deal #5

Aimpoint #10338 ML2, Arms #22M68 Lever Ring Mount, with Arms Cantilever Extension Spacer.

Package Deal #6

Aimpoint #10336 M2, Arms 22M68 Lever Ring Mount with Arms Cantilever Extension Spacer.